Product information

  • Product Name:Surge Generator SG100C

Description

SG100C simulates surge as described by IEC 61000-4-5 standard. It helps you to check surge immunity of DUT like LED Lights, Surge Protection Devices, MOV, GDT and many more electrical appliances and circuit boards. This machine is capable to generated surge upto 10000 volts and 5000 amperes of current and capable to couple with inbuilt CDN upto 16 Amps or external CDN.

Tests According to : IEC/EN 61000-4-5

Max Outpul : SG800C: BKV/3КА

Voltage/Current : SG100C: 10KV/5kA

Voltage Accuracy : 5%

Polarity (+ or -)

Coupling L-N, N-L, L-G, N-G

Voltage Rise Time : 1.2 ±20%

Voltage Fall Time : 20 με + 20%

Current Rise Time : 8 με + 20%

Output Impedance : 2 and 120

Coupling : L/N/G

Angle : Async or 0-360

Min Pulla Interval : 10 sac

No of Pulses : 1 to 999

Integrated CON : 230V/16A/32A/64A

Features: Power failed auto recovery Nistorical reports skip voltage function simple user interface and many more advanced features

Product information

  • Product Name:High Voltage Breakdown Tester (HV530, HV550 and HV5100)

Description

The High Voltage breakdown tester is also known as HiPot tester or High Voltage tester. It is a robust design to test the electrical insulation ability & electrical strength. It is designed to be used in the laboratory and production environment.

Test Voltage : 5KV AC ±1.5%

Short Circuit Current : 30mA. 50mA and 100mA optional

Resolution : 0.01kVp>

Display : 3% Digit LED

Time : 0 to 90 secs

Protection : Zero Start, Over Load

Input Power : 230VAC±10%, 50Hz

Product information

  • Product Name:LED Driver Analyzer DA100

Performance parameter analysis

AC Voltage : 50V-325V 0.1%

AC Current : 0.01A 10 4.5 A

Power Efficiency : 0.1%

Power Factor : ±0.2%

Input AC Frequency : 30Hz-7012

Annual Consumption : ±0.25%

AC power : ±0.1%

DC power : ±0.1%

DC Voltage : 0.1V to 120V

DC current : 25 Amps ±0.5%

Product information

  • Product Name:Surge Comparison Tester ST-1050D

Description

SURGE COMPARISON TESTER is a high potential surge type device used to detect and analyze insulation faults and asymmetry in the electrical windings by balance and comparison method. This instrument is effectively employed to test Stator coil windings. Provision for varying surge voltage from 500V to 10 KV is made available. Faults like turn to turn, Phase to Phase short, improper connections, grounding insulation defects, open winding and wrong number of turns can be immediately detected. The surge comparison tester produces high voltage pulse and monitors their decay within the windings being tested. Two high voltage capacitors are initially charged and then discharged into the winding through a set of SCRs which are triggered at 50Hz. High voltage surges are applied to the winding under test and master windings simultaneously. The resulting voltage decay pattern in each winding is displayed on the LCD screen. If two windings have no fault and are identical, the two traces will also be identical and will superimpose on one another appearing as a single trace. If the test winding has an insulation fault or any other fault, its pattern will differ from that of the standard winding and double trace is observed on the screen. Because the faults are indicated on a DSO in this equipment, by looking at the pattern displayed one can easily identify the nature of the fault and determine the cause of defect. One of the greatest advantages of this equipment is that turn to turn short circuit can be detected easily.

DSO Model

Voltage 10kV

Current600Amps

Energy 5 Joules

Tests Motors, Alternator, Generators

Categories: Generator Testing, Motor Testing

Product information

  • Product Name:Surge Comparison Tester ST-6200D

Description

SURGE COMPARISON TESTER is a high potential surge type device used to detect and analyze insulation faults and asymmetry in the electrical windings by balance and comparison method. This instrument is effectively employed to test Stator coil windings. Provision for varying surge voltage from 500V to 6 KV is made available. Faults like turn to turn, Phase to Phase short, improper connections, grounding insulation defects, open winding and wrong number of turns can be immediately detected. The surge comparison tester produces high voltage pulse and monitors their decay within the windings being tested. Two high voltage capacitors are initially charged and then discharged into the winding through a set of SCRs which are triggered at 50Hz. High voltage surges are applied to the winding under test and master windings simultaneously. The resulting voltage decay pattern in each winding is displayed on the LCD screen. If two windings have no fault and are identical, the two traces will also be identical and will superimpose on one another appearing as a single trace. If the test winding has an insulation fault or any other fault, its pattern will differ from that of the standard winding and double trace is observed on the screen. Because the faults are indicated on a DSO in this equipment, by looking at the pattern displayed one can easily identify the nature of the fault and determine the cause of defect. One of the greatest advantages of this equipment is that turn to turn short circuit can be detected easily.

DSO based Model

Voltage 6kV

Current400Amps

Energy 1.8 Joules

Tests Motors, Alternator, Generators

According IEEE522 and IEC 60034-15

Categories: Generator Testing, Motor Testing

Product information

  • Product Name:Surge Comparison Tester with Hipot and Insulation Resistance (ST-6200P)

Description

SURGE COMPARISON TESTER is a high potential surge type device used to detect and analyze insulation faults and asymmetry in the electrical windings by balance and comparison method. This instrument is effectively employed to test Stator coil windings. Provision for varying surge voltage from 500V to 6 KV is made available. Faults like turn to turn, Phase to Phase short, improper connections, grounding insulation defects, open winding and wrong number of turns can be immediately detected. The surge comparison tester produces high voltage pulse and monitors their decay within the windings being tested. Two high voltage capacitors are initially charged and then discharged into the winding through a set of SCRs which are triggered at 50Hz. High voltage surges are applied to the winding under test and master windings simultaneously. The resulting voltage decay pattern in each winding is displayed on the LCD screen. If two windings have no fault and are identical, the two traces will also be identical and will superimpose on one another appearing as a single trace. If the test winding has an insulation fault or any other fault, its pattern will differ from that of the standard winding and double trace is observed on the screen. Because the faults are indicated on a DSO in this equipment, by looking at the pattern displayed one can easily identify the nature of the fault and determine the cause of defect. One of the greatest advantages of this equipment is that turn to turn short circuit can be detected easily.

LCD Model

Voltage 6kV

Current400Amps

Energy 1.8 Joules

Tests Motors, Alternator, Generators

According to IEEE522 and IEC 60034-15

Categories: Generator Testing, Motor Testing

Product information

  • Product Name:Surge Generator SG600C

Description

SG600C simulates surge as described by IEC 61000-4-5 standard. It helps you to check surge immunity of DUT like LED Lights, Surge Protection Devices, MOV, GDT and many more electrical appliances and circuit boards. This machine is capable to generated surge upto 6000 volts and 3000 amperes of current and capable to couple with inbuilt CDN upto 16 Amps or external CDN upto 128Amps.

Surge Voltage Upto 6kV

Surge Current Upto 3kA

1.2/50 us – 8/20 us Waveform

Single Impulse Generator

Polarity (+ or -)

Coupling L-N, N-L, L-G, N-G

Phase angle (0-359 deg)

Output Impedance (2 or 12 or 500 Ohms)

Number of Surge (upto 9999)

Interval Duration (10 to 999 seconds)

Isolation Transformer Included

Product information

Description

SurgeGen is the properitory software used to generate reports from Fosterbell’s Surge Generator instrument. Surge Generator Software – Version 1 for instruments sold before 25/07/2024

SurgeGenerator Software- update (24.10.2024)

SurgeGenerator Installer – update(24.10.2024)

Product information

  • Product Name:LED Products Testing Service

Description

Our high-end in-house testing facility enables our customers to test LED Driver, Bulbs, Tube Lights, and Street Lights. Providing access to our expert engineering and consulting team to comply IEC / BIS directives like Surge Immunity, Impulse Test, AC Breakdown, DC Hipot, Driver Analyzer, Insulation Resistance, Dip interrupt, Harmonic Analysis, etc.

High Voltage & High Current Probe

At Fosterbell, we specialize in manufacturing high-quality High Voltage Differential Probes designed for precision and safety in high voltage testing applications. Our probes are built to handle voltages up to 10,000V, providing accurate and reliable measurements for a wide range of industrial and laboratory environments.

Key Features:

Voltage Range : 0 to 10000 Volt

Allenuntion Factor : 1000:1

Cument Range : 0 to 5000Amps

Attenuation Factor : 100:1

Whether you're conducting power system diagnostics, surge testing, or electronic circuit testing, our high voltage differential probes deliver high performance with maximum safety. As a trusted manufacturer, we ensure that our products meet the most rigorous quality standards at competitive prices.